k3pro Dental Implant – Argon Medical Germany at AEEDC 2019
The UAE International Dental Conference & Arab Dental Exhibition – (AEEDC Dubai) is the leading dental event in the in the Middle East, North Africa, and South Asia region (MENASA) and the second largest dental event in the world. The event is now stepping into its 24th year with the theme “Education & Innovation Transfer “
About Argon Medical
For over 16 years, Argon has been pioneers in the implant industry (ex. conical connection). Argon believes in a statement of independence, where their value is shown by the quality products they manufacture, not the “size” of the manufacturing facility. With headquarters located in Germany and our U.S. distribution centre located in Wisconsin, Argon is available whenever you need them.
The market average of current systems today is characterized by epicrestal or crestal positioning. Despite the platform switch, micro-movements of the structure not only lead to screw loosening, but also to bacterial colonization of the implant. These structural movements initially lead to mucosal degradation, which causes aesthetic problems, and subsequently to bone loss and loss of primary stability. The implant can be lost in the medium term.
The proven philosophy of K3Pro, however, is subcrestal use. Due to the bacteria-proof and micro-motion-free cone and the sloping shoulder, the implant heals deep into the bone. The gingiva is permanently attached. With the 1.5 ° cone shape and force closure, we can achieve the best of both worlds: the surgical and prosthetic flexibility of the two-part system, with simultaneous load distribution and stability as with one-piece implants. The distances to adjacent teeth or implants can be significantly reduced.
A truly sustainable solution!
Technical Specifications of the K3Pro Implant System:
- 5degree self-lock Morse taper conical connection.
- This Morse Taper offers bacterial seal.
- 2mm anti-rotational hexagon.
- Abutment screw with spiral, self-clamping thread.
- Two Parallel 180degree offset threads for faster insertion and larger surface area.
- Sloping shoulder design with micro-groove surface and sub-crestal insertion, allows for the bone to grow up over the top of the Implant.
- The self-tapping threads and cutting grooves allow for easy insertion and optimum initial stabilization.
- These self-tapping threads reduce the work drastically as they are very easy for insertion.
- OsteoActive Surface for faster and ensured osseointegration.
- Apical Thread for ideal and faster bone- remodelling
Range of K3Pro Implant System:
- K3Pro Sure
- K3Pro Rapid
- K3Pro Short
- Rapid Surgery
Argon Development: From the first drawing to handmade samples or individual pieces, our employees develop new implants, special solutions and new materials. Minimal invasive with Osteograph. The Osteograph which is developed and manufactured by us is a precision pantograph to produce three-dimensional grafts. The Osteograph enables to dispense with time-consuming adjustments and modeling of allografts (“self-milling”). At the same time, the risk of inaccurate fit is minimized. In this minimally invasive procedure, the block is first manufactured, after which the procedure is performed on the patient.
Argon Passion: The K3Pro implant system developed by us captivates with its broad product portfolio with optimally coordinated system components. K3Pro offers outstanding product properties with excellent clinical and esthetic results. The best connection between implant and abutment is ensured in the K3Pro implants by the proven 1.5° taper. K3Pro occupies a top position among the conical connections in the implant market. The connection with K3Prois so precise that even with implants with a diameter of 3 mm or more, optimal occlusion distribution, as with a one-piece implant, is guaranteed within the system.
Knowledge through Argon: In order to ensure the medical training and education of physicians and surgeons, a special training center was opened in 2015 in our headquarters in Germany. This state-of-the-art and technically sophisticated equipped place accommodates groups of up to 30 participants. The training offer includes material and specialized training as well as surgical training with live surgery.
Test Passed: The cornerstones of product development are the laboratory test results obtained on specially designed in-house dental implant testing machines. With a test capacity of more than 4,000 weekly test hours, the laboratory is one of the leading players in this field.
Products: Our product range includes dental implants with the conical connection technology, bone graft substitutes, surgical instruments, special pantographs and services in 3D printing and milling technology, as well as fatigue testing machines for implants. Our corporate goal is to inspire you as a customer through an innovative, broad and affordable range of products and services. We develop, inspect, treat, clean and package all components ourselves, so we can assure you of the highest standard.
For More Information:
Argon Medical Productions
Gesellschaft mbH & Co. KG
55411 Bingen am Rhein, GERMANY
Tel. + 49 (0) 6721 / 3096-0
Mobil: +49-174-811 7111
Fax +49 (0) 6721 / 3096-29