Mind-Blowing facts of Argon K3Pro Implant System from the Million Dollar Implant Sales Expert at IDS 2019.
ARGON Medical is an internationally established manufacturer of systems for dental implantology as well as allograft transplants with headquarters in Bingen am Rhein. All our products are developed and produced in Germany and bear the seal “Made and Engineered in Germany“. Every year, Argon organizes many training events and symposiums with well-known speakers, who serve the medical fraternity around the world.

The proven philosophy of K3Pro Implant System, however, is subcrestal use. Due to the bacteria-proof and micro-motion-free cone and the sloping shoulder, the implant heals deep into the bone. The gingiva is permanently attached. With the 1.5 ° cone shape and force closure, we can achieve the best of both worlds: the surgical and prosthetic flexibility of the two-part system, with simultaneous load distribution and stability as with one-piece implants. The distances to adjacent teeth or implants can be significantly reduced.

A truly sustainable solution!

Range of K3Pro Implant System:
“K3Pro Sure,  K3Pro Rapid,  K3Pro Short,  prosthetics,  myTiBase,  laboratory,  surgery, Rapid Surgery.

Why is the Osseointegration from K3Pro Implant System so Special?

The K3Pro Implant becomes a part of your own Jaw so neatly and efficiently that it is hard to recollect that the Dental Implant placed is artificial and not real. The integration into the jaw given by K3Pro Implants is so neat! All thanks to the. 1.5 degree self-lock Morse taper conical connection which offers a Bacterial seal, which not only has a 1.2mm anti-rotational hexagon but also Abutment screw with spiral, self-clamping thread. There are Two Parallel 180degree offset threads for faster insertion and larger surface area. The Additional benefit is because of the Sloping shoulder design with micro-groove surface and sub-crestal insertion, allowing the bone to grow up over the top of the Implant. Thanks to the self-tapping threads and cutting grooves that allow for easy insertion and optimum initial stabilization. Work is hence reduced drastically as it is very easy for insertion. The Conical & the Apical Thread make it ideal for faster bone- remodelling.

Thus, an OsteoActive Surface is created for faster and ensured osseointegration.

The K3Pro SURE Implant System comes with compression thread design. The implant drill specifies the direction of the implant. The parallel thread and the slightly conical implant body offer an increased surface area compared to conventional implants. SURE implants are suitable for all indications and provide ideal primary stability in all bone densities from D1 to D4. The sloping shoulder and the subcrestal insert allow a tight bone seal and a low emergence profile from the sulcus. Thus, the bone and papillae are secured in the long run.

The K3Pro RAPID Implant System comes with self-tapping thread design and conical implant body. The implant can still be steered directionally after drilling. The cutting thread and the cutting groove allow a controlled placement of the implant. Rapid implants are suitable for all indications and offer ideal primary stability; especially in the upper jaw. The implant is ideal for RapidFix superstructures, with implants to be directionally controlled. The sloping shoulder and the subcrestal insert allow a tight bone seal and a low emergence profile from the sulcus. Thus, the bone and Papilla content is secured in the long run.

The K3Pro SHORT Implant System has been offering implants with diameters of 3 and 3.5 mm and lengths of between 9 and 17 mm for years, for the most difficult indications with greatly reduced bone supply and aesthetically outstanding solutions in the anterior region. The revolutionary, long tapered connection of 1.5 degrees, which ensures generally sustainable bacteria tightness and no micro-motion, offers an additional great advantage: The complete range of abutments for all prosthetic solutions is available to the team of surgeon and dental technician without restriction.

The same applies to the new short implants in lengths of 5.5 and 6.5 mm (with diameters starting at 4 mm), which can be blocked or used as a single tooth replacement. Thanks to the new compressive and tensile load,    SHORT Implants effectively support the reconstruction and long-term preservation of the bone. With its solutions not only for standard cases but for the most unusual indications, K3Pro offers a complete spectrum for sophisticated implantology. And that with uncompromising quality “made in Germany”.

The principle of Argon stands for a Declaration of Independence that adds value and proves that size is not everything. It’s about a company that consistently goes its own way. Argon are trailblazers, e.g. for the conical connection, which has been an integral part of our philosophy for more than 15 years.

If the question is about the best than the answer is K3Pro Implants by Argon.

META-  Bacteria-proof and micro-motion-free conical connection promised by Argon Medical  #IDS 2019